Question 1

When a ControlLogix module with an integrated USB port is being used for the first time with a particular computer, the required USB drivers must be configured.

Accepted Answer

A) True 
 B)False

Question 2

If the switches of the 1756-EN2T are set for a specific address, this IP address can be changed in the module's configuration window in RSLinx.

Accepted Answer

A) True 
 B)False

Question 3

If the USB driver is configured in conjunction with the USB port configuration of the personal computer, the driver cannot be reconfigured in ____________________.

Accepted Answer

RSLinx

Question 4

List two examples of features supported by newer modular ControlLogix Ethernet/IP communications modules.

Accepted Answer

Examples of features supported by newer ...

Question 5

When a new device is connected to a personal computer, the Found New Hardware Wizard can assist with installing driver software automatically.

Accepted Answer

A) True 
 B)False

Question 6

The three switches on top of the 1756-EN2T module can be modified before or after installing the module in a chassis.

Accepted Answer

A) True 
 B)False

Question 7

List three points to keep in mind for using USB communications between a personal computer and a ControlLogix Communications Module.

Accepted Answer

Points to Keep in Mind for Using USB Com...

Question 8

If you have a personal computer with no standard serial port but with USB ports, and a ControlLogix controller with a traditional 9-pin D-shell serial port, direct serial communication between the personal computer and the ControlLogix controller will be very easy.

Accepted Answer

A) True 
 B)False  False

Question 9

With the RSLinx driver configured, a RSLogix 5000 project can be downloaded from the personal computer to the ControlLogix controller by way of the 1756-EN2T's USB port.

Accepted Answer

A) True 
 B)False

Question 10

To download an RSLogix project to a ControlLogix controller, the project must be saved and closed.

Accepted Answer

A) True 
 B)False

Question 11

Typically, the personal computer USB driver configuration only has to be completed once.

Accepted Answer

A) True 
 B)False

Question 12

In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, what are two other methods by which the module's IP address can be configured?

Accepted Answer

In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, the module's IP address can also be configured using RSLogix 5000 or RSLinx software.

Exam 29: Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

When a ControlLogix module with an integrated USB port is being used for the first time with a particular computer, the required USB drivers must be configured.

Correct Answer
verified

If the switches of the 1756-EN2T are set for a specific address, this IP address can be changed in the module's configuration window in RSLinx.

Correct Answer
verified

If the USB driver is configured in conjunction with the USB port configuration of the personal computer, the driver cannot be reconfigured in ____________________.

Correct Answer
verified
RSLinx

List two examples of features supported by newer modular ControlLogix Ethernet/IP communications modules.

Correct Answer
verified
Examples of features supported by newer ...
View Answer

When a new device is connected to a personal computer, the Found New Hardware Wizard can assist with installing driver software automatically.

Correct Answer
verified

The three switches on top of the 1756-EN2T module can be modified before or after installing the module in a chassis.

Correct Answer
verified

List three points to keep in mind for using USB communications between a personal computer and a ControlLogix Communications Module.

Correct Answer
verified
Points to Keep in Mind for Using USB Com...
View Answer

If you have a personal computer with no standard serial port but with USB ports, and a ControlLogix controller with a traditional 9-pin D-shell serial port, direct serial communication between the personal computer and the ControlLogix controller will be very easy.

Correct Answer
verified
False

With the RSLinx driver configured, a RSLogix 5000 project can be downloaded from the personal computer to the ControlLogix controller by way of the 1756-EN2T's USB port.

Correct Answer
verified

To download an RSLogix project to a ControlLogix controller, the project must be saved and closed.

Correct Answer
verified

Typically, the personal computer USB driver configuration only has to be completed once.

Correct Answer
verified

In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, what are two other methods by which the module's IP address can be configured?

Correct Answer
verified
In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, the module's IP address can also be configured using RSLogix 5000 or RSLinx software.

Exam 29: Configuring a Usb Driver for a 1756-En2t Ethernet Communications Module

When a ControlLogix module with an integrated USB port is being used for the first time with a particular computer, the required USB drivers must be configured.

Correct AnswerverifiedShow Answer

If the switches of the 1756-EN2T are set for a specific address, this IP address can be changed in the module's configuration window in RSLinx.

Correct AnswerverifiedShow Answer

If the USB driver is configured in conjunction with the USB port configuration of the personal computer, the driver cannot be reconfigured in ____________________.

Correct AnswerverifiedRSLinx

List two examples of features supported by newer modular ControlLogix Ethernet/IP communications modules.

Correct AnswerverifiedExamples of features supported by newer ...View AnswerShow Answer

When a new device is connected to a personal computer, the Found New Hardware Wizard can assist with installing driver software automatically.

Correct AnswerverifiedShow Answer

The three switches on top of the 1756-EN2T module can be modified before or after installing the module in a chassis.

Correct AnswerverifiedShow Answer

List three points to keep in mind for using USB communications between a personal computer and a ControlLogix Communications Module.

Correct AnswerverifiedPoints to Keep in Mind for Using USB Com...View AnswerShow Answer

If you have a personal computer with no standard serial port but with USB ports, and a ControlLogix controller with a traditional 9-pin D-shell serial port, direct serial communication between the personal computer and the ControlLogix controller will be very easy.

Correct AnswerverifiedFalse

With the RSLinx driver configured, a RSLogix 5000 project can be downloaded from the personal computer to the ControlLogix controller by way of the 1756-EN2T's USB port.

Correct AnswerverifiedShow Answer

To download an RSLogix project to a ControlLogix controller, the project must be saved and closed.

Correct AnswerverifiedShow Answer

Typically, the personal computer USB driver configuration only has to be completed once.

Correct AnswerverifiedShow Answer

In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, what are two other methods by which the module's IP address can be configured?

Correct AnswerverifiedIn addition to using the three switches on top of the 1756-EN2T module to configure an IP address, the module's IP address can also be configured using RSLogix 5000 or RSLinx software.

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
RSLinx

Correct Answer
verified
Examples of features supported by newer ...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
Points to Keep in Mind for Using USB Com...
View Answer

Correct Answer
verified
False

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
In addition to using the three switches on top of the 1756-EN2T module to configure an IP address, the module's IP address can also be configured using RSLogix 5000 or RSLinx software.