Question 1

Which of the following consists of a frame-mounted plate with a shaft and knob and hinged u-shaped shackle that mounts on the door?

Accepted Answer

A)   Padlocks
B)   Drop bars
C)   Door limiter
D)   Surface boltsE) B) and C)
F) A) and C)

Question 2

When operating power tools, a firefighter should never carry the tool more than:

Accepted Answer

A)   5 feet (1.5 m) .
B)   10 feet (3 m) .
C)   15 feet (4.6 m) .
D)   20 feet (6.1 m) .E) All of the above
F) A) and D)

Question 3

Which of the following can be used to create an opening for a penetrating nozzle?

Accepted Answer

A)   Pry bar
B)   Stitch drill
C)   Chain saw
D)   Rotary sawE) B) and D)
F) B) and C)

Question 4

Who must determine what effect breaching will have on making an opening in the structural integrity of interior walls?

Accepted Answer

A)   Supervisors
B)   Firefighters
C)   Business owners
D)   Insurance adjustersE) B) and C)
F) C) and D)

Question 5

How are wooden handles of forcible entry tools preserved?

Accepted Answer

A)   A coat of paint or varnish
B)   A coat of boiled linseed oil
C)   Application of chromium or metal surface
D)   Washing with mild detergent and wiping dryE) C) and D)
F) B) and C)

Question 6

A double swinging door secured by a mortise lock can be pried to:

Accepted Answer

A)   break open.
B)   let the bolt slip past receiver.
C)   turn knob to retract latch bolt.
D)   operate with doorknob or lever.E) B) and D)
F) B) and C)

Question 7

To force entry on a sliding door, break the glass with an axe or:

Accepted Answer

A)   cut lock with saw.
B)   pry door from side frame.
C)   lift sliding panel up and out of track.
D)   use Halligan to spread door panels apart.E) B) and D)
F) A) and B)

Question 8

Which of the following should be done after "try before you pry"?

Accepted Answer

A)   Pry the door or window
B)   Force a window to reach lock on door
C)   Determine correct tool to force entry
D)   Look for lockbox near the main entranceE) A) and B)
F) None of the above

Question 9

Which of the following is a combination of a flat-head axe and Halligan tool?

Accepted Answer

A)   Irons
B)   Truck set
C)   Shove knife
D)   StrongbackE) C) and D)
F) B) and D) A

Question 10

Which of the following is MOST accurate about the care and maintenance of power equipment?

Accepted Answer

A)   Check electrical cords for damage
B)   Ensure tools will start automatically
C)   Repair blades that are damaged or worn
D)   Replace ground prong on three prong plugsE) A) and D)
F) A) and B)

Question 11

Which of the following can be nested together for tool combinations?

Accepted Answer

A)   Pike pole and hook
B)   Maul and sledgehammer
C)   Power saw and handsaw
D)   Halligan tool and flat-head axeE) A) and D)
F) None of the above

Question 12

Exterior walls made of wood can be cut or breached with a (an) :

Accepted Answer

A)   jackhammer.
B)   battering ram.
C)   axe or sledgehammer.
D)   hacksaw or other power tool.E) A) and B)
F) A) and C)

Question 13

Which of the following is MOST accurate about using a rotary saw to breach a metal wall?

Accepted Answer

A)   Only use conventional tools
B)   Leave the utilities on in the structure
C)   Have charged hoseline available in case of sparks
D)   Cut the smallest square possible to prevent further damageE) A) and B)
F) A) and D)

Question 14

Which of the following provides firefighters rapid access to outward swinging latch doors?

Accepted Answer

A)   A-tool
B)   J-tool
C)   K-tool
D)   Shove knifeE) C) and D)
F) B) and C)

Question 15

When caring for an unprotected metal surface, use a metal file to:

Accepted Answer

A)   hide defects.
B)   remove dirt and rust.
C)   make blade edge sharp.
D)   remove burrs from cutting edge.E) B) and C)
F) A) and B)

Question 16

A chain-link fence should be cut quickly with a (an) :

Accepted Answer

A)   axe.
B)   bolt cutter.
C)   rotary saw.
D)   cutting torch.E) None of the above
F) A) and B)

Question 17

Which of the following personnel determines where to perform forcible entry?

Accepted Answer

A)   Fire Chief
B)   Firefighter
C)   Safety Officer
D)   Incident CommanderE) B) and D)
F) C) and D)

Question 18

Damage when forcing a door can be justified by severity of emergency and:

Accepted Answer

A)   manpower available.
B)   seriousness of injury.
C)   speed needed for entry.
D)   tools needed for the job.E) A) and B)
F) C) and D) C

Question 19

Most hinges on swinging doors are mounted on __________that permits swinging in one or both directions.

Accepted Answer

A)   inside
B)   outside
C)   one side
D)   both sidesE) All of the above
F) C) and D)

Question 20

Which of the following are portable or detachable locking devices?

Accepted Answer

A)   Padlocks
B)   Drop bars
C)   Door limiters
D)   Surface boltsE) A) and C)
F) A) and B) A

Exam 11: Forcible Entry

Which of the following consists of a frame-mounted plate with a shaft and knob and hinged u-shaped shackle that mounts on the door?

Correct AnswerverifiedShow Answer

When operating power tools, a firefighter should never carry the tool more than:

Correct AnswerverifiedShow Answer

Which of the following can be used to create an opening for a penetrating nozzle?

Correct AnswerverifiedShow Answer

Who must determine what effect breaching will have on making an opening in the structural integrity of interior walls?

Correct AnswerverifiedShow Answer

How are wooden handles of forcible entry tools preserved?

Correct AnswerverifiedShow Answer

A double swinging door secured by a mortise lock can be pried to:

Correct AnswerverifiedShow Answer

To force entry on a sliding door, break the glass with an axe or:

Correct AnswerverifiedShow Answer

Which of the following should be done after "try before you pry"?

Correct AnswerverifiedShow Answer

Which of the following is a combination of a flat-head axe and Halligan tool?

Correct AnswerverifiedA

Which of the following is MOST accurate about the care and maintenance of power equipment?

Correct AnswerverifiedShow Answer

Which of the following can be nested together for tool combinations?

Correct AnswerverifiedShow Answer

Exterior walls made of wood can be cut or breached with a (an) :

Correct AnswerverifiedShow Answer

Which of the following is MOST accurate about using a rotary saw to breach a metal wall?

Correct AnswerverifiedShow Answer

Which of the following provides firefighters rapid access to outward swinging latch doors?

Correct AnswerverifiedShow Answer

When caring for an unprotected metal surface, use a metal file to:

Correct AnswerverifiedShow Answer

A chain-link fence should be cut quickly with a (an) :

Correct AnswerverifiedShow Answer

Which of the following personnel determines where to perform forcible entry?

Correct AnswerverifiedShow Answer

Damage when forcing a door can be justified by severity of emergency and:

Correct AnswerverifiedC

Most hinges on swinging doors are mounted on __________that permits swinging in one or both directions.

Correct AnswerverifiedShow Answer

Which of the following are portable or detachable locking devices?

Correct AnswerverifiedA

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
C

Correct Answer
verified

Correct Answer
verified
A